|
Home InventoryAttritors
and Virbo Mills
ATTRITORS & VIBRO MILLS
PHOTO
AVAIL |
INVENTORY
NUMBER |
BRIEF
DESCRIPTION |
 |
PC12241 |
Sweco Vibratory Mill Model M-18L, Urethane lined chamber. Cover is clamped on, equipped with gasket and inspection port. Inside of cover is urethane lined. Bottom discharge equipped with ball valve. 1/4 hp 460 voltage, A-B motor starter. Unit will be test run prior to shipment. Unit is bolted to a steel stand/table. Unit comes with a full charge of media
|
|
PC10637 |
Attritor, Szegvari, 128 Gallon Grinding Capacity, 60-80 Gallon Delivered Capacity, Stainless Steel Construction, Jacketed Bowl, 20 HP, Explosion Proof Motor, on Base. |
|
PC10638 |
Attritor, Union Process, Model 100S, 156 Gallon Total Capacity, Stainless Steel Construction, Jacketed Bowl, 20/6.75 HP two speed Ex-Proof Motor, 460 Volt, on Base with 2 HP Circulation Pump. |
|
PC11309 |
Grinding Mill, Sweco, Model M45L-D, 27 Gallon Maximum Grinding Capacity, Carbon Steel Construction, Urethane Lined Bowl with Cover, on Base with 5 HP. 220/440 Volt Motor. |
|
PC11365 |
Attritor, Union Process, Model 01-HD, Szegvari, Size 01, 110 cc deep jacketing grinding tank, with stainless steel cover with shaft seals for grinding with inert gases, driven by 1/2 HP Vari-drive, 3/60/208-230/460V, 1140 RPM, Ex-Proof Motor, speeds variable from 345 RPM to 1728 RPM. |
|
PC11718 |
Sweco Grinding Mill Model DM-1, Wet Grinding Mill, 70 Gallon maximum grinding capacity, stainless steel construction, jacketed chamber, with cover, complete on base with 10 HP motor drive, 3/60/230/460 volt. Machine is complete with charge of grinding media. |
|
PC11819 |
Sweco Grinding Mill, 18", Urethane Liner, with Plastic Cover, 1/3 HP Drive, 3/60/440Volt, 1200 RPM. |
|
PC11890 |
Attritor, Union Process, Model 100S, Jacketed Bowl, Stainless Steel Bowl and Shaft, 2 Speed Motor, 20/6.7 HP, 1720/555 RPM, 3 Phase, 460 Volt, Manual Crank for Bowl, Bottom Grate Discharge, Equipped with Ex-Cello Gearbox, HP Rating: 38, ratio 10:1, Water cooled gearbox, unit sandblasted, painted and test run in shop prior to shipment. |
|
PC11941 |
Attritor, Union Process, Type B, Lab, 8" Diameter Bowl, Intermittent Type B, Lab Unit, with Reeves Variable Speed Drive (275-2000 RPM), 2 HP, 230/460 Volt, 3 Phase, 1160 RPM, UL Listed Motor. |
|
PC11942 |
Attritor, Union Process, Type B, Lab, 8" Diameter Bowl, Intermittent Type B, Lab, with Reeves Variable Speed Drive (275-2000 RPM), 2 HP, 230/460 Volt, 3 Phase, 1160 RPM, UL Listed Motor. |
|
PC11967 |
Attritor, Union Process, Model Q-25, Circulation grinding type, stainless steel construction, jacketed, 27.5 gal grinding chamber, rated approximately 35 gpm, driven by 25/ 8.3 hp., 3/60/460 volt, 1795/ 570 RPM, 2- speed TEFC motor, discharge valve, mounted on base, 1983. |
|
PC11982 |
Sweco Vibro Energy Mill, Model M-18L, Vibro Energy mill, lined with abrasion resistant elastomer, 2.6 gallon working capacity, driven by 1/4 Hp, 3/60/ 440 volt, 1140 RPM motor unit complete with stainless steel cover, clamp, and discharge valve |
|
PC11986 |
Sweco Vibro Finishing Mill Model FMD10-2, Vibro Finishing Mill, Poly lined, driven by 5 HP Motor |
|
