Used Front Loader Kilns, used machinery and equipment at Pacific Ceramics Machinery and Equipment

FRONT LOADER KILNS

PHOTO AVAIL	INVENTORY NUMBER	BRIEF DESCRIPTION
	PC2000	Alpine Front Loader Kiln, Model HF-30, 30 Cu.Ft., ID 27" Deep x 33" Wide x 57" High, Gas Fired, Alpine Controller, (2) Dayton Blowers Model 4C4434, Door Opening 30"W x 57"H, 120 Volt. Outside Dimensions: 72" Wide 58" Deep (with blower) x 8'7" High (with exhaust hood). Approx. Shipping Weight 4500 lbs.
	PC3605	Electra Front Loader Kiln, Model 121218-3000, Work Area: 12"W x 12"H x 18"L, Max. Temp. 3000 deg.F., Controls: Honeywell UDC-3000 solid state indicating controls for temperature & hi-limit, 480 Volt, 3 Phase, 25 KW, Brick Lined, with hand operated vertical rise door. Work area has "U" shaped molybdenum disilicide heaters arranged vertically on both side walls and rear wall. Power is fed to the heaters from the top by solid state SCR power supply. A special low voltage secondary transformer is located below the furnace. Unit is equipped with door safety interlock switch. Furnace has (9) broken heating elements. Replacement of broker heaters is available at an additional price. New elements are additional $250.00 each. Overall Dimensions: 45"W x 103"H x 64"L.
	PC10924	Front Loader Kiln, Setting Area: 10" x 10" x 14', 2700 deg.F. (1480 deg.C.) New Silicon Carbide Heating Elements, 16 KVA, Set-Point Temp. Controller, Proportional SCR power control, 220 Volt, 1 Phase, 60 HZ, 30 AMPx, approx. weight 1000#.
	PC11205	Front Loader Kiln, 27 Cu.Ft. Setting Area: 3' x 3' x 3' High, Max. Temp. 2200 deg.F., with Controller, Gas Fired, Fiber Lining.
	PC11475	Keith Front Loader Kiln, Model KKR 24 30 24 2350, 12 Cu.Ft., Two Zones, 2350 deg.F., Electric, 480 Volt, 3 Phase, 60 Hz, 30 KW, 36 AMPs, Metallic Wire Elements, 1 Duplex Type R Thermocouple (Top Zone and Limit Control) and 1 Single R Thermocouple (Bottom Zone Control). Control Concepts Model 3020 Zero Cross SCR Power Controllers, Eurotherm 818P4 Master Program Temp. Controller, Eurotherm 818S "Slave" Top Zone Controller, Eurotherm 93 Overtemp. Protection, Load Capacity 200 lbs (91 kg), Chart Recorder, Proportional Cooling Damper for Program Cooling.
	PC11769	Harrop Box Kiln, Work Area: 13"W x 30"D x 16"H, 1510 deg.C., 2750 deg.F., Electric, 480 Volt, 1 Phase, 32 KW, LFE digital programmable temp. controller and Honeywell Dialapak high limit safety, power to tap transformers controlled through Halmar SCR with current limiting, Single door, furnace lined with insulating firebrick (10" thick), hard brick piers support silicon carbide hearth plate, (8) siliocn carbide heating elements, two exhaust ports with slide blocks located in roof, new silicon carbide hearth plate supports the work load, Overall 56"W x 64"D x 83"H, Condition: Good - tested operational.
	PC11806	Harrop Box Kiln Model NMR-BG-14-48125-2750, Work Area: 13"W x 30"D x 16"H, Electric, 480 Volt, 1 Phase, 32 KW, Max. Temp. 2750 deg.F. (1510 deg.C), with LFE digital programmable temp. controller and Honeywell Dialapak high limit safety, Power to tap transformers is controlled through Halmar SCR with current limiting, two tap transformers (4 posiition) are mounted on furnace frame, single door with dual pivot hinge, furnace is insulating firebrick (10" thick), hard brick piers support silicon carbide hearth plate, a new silicon carbide hearth plate supports the work load, overall dimensions: 56"W x 64"D x 83"H, Good Condition, Tested operational.
	PC11807	Pacific Scientific Box Atmosphere Kiln, Model PNR-486048, Work Area: 48"W x 60"D x 48"H, Electric, 460 Volt, 3 Phase, 190 kw, Two zones of control, there is a digital programmable temp. controller, high limit safety controller and Honeywell strip chart recorder, two tap transformers reduce voltage to heating elements, pneumatically operated vertical lift door, brick lined interior with hardbrick piers and tile hearth to support work load, total of 24 silicon carbide heating elements, atmosphere inlet tube located near rear wall, Condition: Very Good.
	PC12053	Harper Box Kiln Model HS-9920-B-30-SD, Work Area: 9"W x 9"H x 30"L, Max. Temp. 3000 deg.F., Electric, 460 Volt, 3 Phase, 60 Cycle, 24 KW, Overall Dimensions: 44"W x 93"H x 44"L, Condition: Good, Barber Colman Digital Programmable/ramping type temp. controller and a Barber Colman analog high limit, vertical lift door that is manually operated by foot lever, furnace is refractory lined and has silicon carbide hearth plate supported on brick piers, (12) silicon carbide heating elements mounted horizontally across work chamber, 6 over top and 7 under hearth plate providing good uniform heating.
	PC12092	Blue M Box Kiln, Model RG-3000C-2, Work Area: 8.5"W x 13.5"Deep x 8,.5"H, Electric, 240 Volt, Single Phase, 7.5 KW, Max. Temp. 2750 deg.F., Overall 33"W x 38"D x 65"H, with Honeywell Dial-a-Trol Controller and a Dial-a-Pak High Limit Controller, tap transformer for adjusting the voltage, Sindl swing door, brick lined with refractory hearth, heating elements are silicon carbide with 4 on each side of work area, new set of 8 elements will be shipped with furnace for buyer installation. Condition: Very Good.
	PC12122	Kerr Box Furnaces, Model Series 445 "14x3", (Quant. Available: 8) Ceramic Lined Chamber Measures 14" High x 14" Wide x 14" Deep, Max. Temp. 2000 deg.F., 1 Phase, 240 Volt.

BACK TO INVENTORY