|
Home InventorySmall Pugmill Extruders
SMALL PUGMILL EXTRUDERS
PHOTO
AVAIL |
INVENTORY
NUMBER |
BRIEF
DESCRIPTION |
 |
PC12430 |
Interanational Pugmill/Extruder Model Ceramist Special, 15 HP, 208-240, 3 Phase, 60 Cycle Motor, Vacuum pump has 2 HP Motor (vacuum pump is not working). Pugmill is in good operating condition. |
|
PC2762 |
JC Steele Combination Pugmill/Extruder Model 20, Complete with New Drive Shaft and Air Clutch, Gears in Excellent condition, Machine is in Excellent Condition. |
|
PC11178 |
International Extruder, Model Ceramist Special, (Quant. Available: 3) Pugtub 5' Long x 16" Wide, 6" Outlet, Tub is Stainless Steel Lined with Stainless Steel Knives, Drive is 15 HP. |
|
PC11696 |
Davis Standard Extruder, Model 15-T, 1.5" Dia. Screw, 24:1 L/D, Electrically heated barrel, 3 barrel zones, air cooled barrel, 2 die zones, 2 adapter zones, with complete control panel, driven by 7.5 HP oilgear hydraulic drive, equipped with 7" wide sheet die, equipped with stainless steel hopper. |
|
PC11697 |
Sterling Extruder, 1", 24:1 L/D barrel, electrically heated, water cooled, 2 HP US Electric Vari Drive, 220/440 Volt, Full Control Panel mounted under extruder, 2 barrel zones, one die zone, amp meter, tachometer, pressure gauge, start, stop, Barber Colman temp. controllers. |
|
PC11698 |
Brabender Lab Extruder, 3/4", 24:1 L/D, electrically heated barrel, water cooled, 3 barrel zones, vented barrel, jacketed feed throat, stainless steel feed hopper, equipped with control cabinet which includes Honeywell Programmable Controller, GE adjustable speed drive, disconnect and motor starter, unit is mounted on cabinet with casters. |
|
PC12065 |
Johnson Plastic Extruder, Model F284, 24: 1 L/D, 1.5", 3 Barrel Zones, Air Cooled, 15 HP DC Drive, Jacketed Feed Throat, Feed Hopper, Equipped with full Control Panel. |
|
PC12066 |
GKN Windsor Plastic Extruder Model SS45, 1.75", 30:1 L/D Barrel, Electrically Heated, Water Cooled, Cast Aluminum Heaters, 25 HP DC Drive, 440 Volt, Equipped with 4 Barrel Zones, 3 Die Zones, Digital Readout, Unitized Control Panel, Mounted on Base, Equipped with Feed Hopper and Clam Shell Die. |
|
PC12067 |
APV Twin Screw Mixer/Extruder Model CP1100, Barrel Length to Barrel Dia: 11.5 to 1, 100 mm dia., Barrel has intermeshing screws, figure 8 design, Agitator speed 15-150 RPM, Design operating temp. 100 deg.C., Liner material: duplex stainless steel, heating and cooling: 4 zones, barrel has 2 separate chambers, each for water based heat/cool, discharge: end discharge, equipped with die. |
|
PC12116 |
Baker Perkins Twin Screw Compounding Extruder, 100 mm, Segmented Twin Screws, 50 HP DC Main Drive Motor, Siemens-Allis. Barrle is 40" Long, clam shell type barrel, jacketed, barrel lining has been removed and not available, a pallet of spare screws is included, screws are cored and fitted with rotary unions for cooling, equipped with control panel. |
|
