PO Box 7842
Stockton, CA 95267
(209) 477-4511



info@pacceram.com

Home

About Us

Inventory

Plant Liquidations

Newsletter

Information Requests

Free Catalog


All Rights Reserved
Privacy Policy

HomeInventoryPulverizers



PULVERIZERS
PHOTO
AVAIL
INVENTORY
NUMBER
BRIEF DESCRIPTION
PC12685 Bantam Mikro Pulverizer, Type CF, Sanitary Stainless Steel Hosokawa Micron Model CF Bantam Pulverizer, Sanitary Stainless Steel Construction with stirrup hammers, Motorized screw feeder, Mill belt driven by 1 HP Motor, 14,000 RPM Rotor Speed, mounted on stand, complete with air-relief frame and hopper.
PC12638 Mikropul Pulverizer. Type SH, Stainless Steel Housing. Steel hammers and lining. 6 swinging hammers. auger feed. on legs with casters. Start stop buttons. Unit has been test run in our shop. Shop will run this unit with a 1 day notice.
PC12588 Fitzpatrick "A" Series Model D6A Fitzmill, Pan Feed, Sanitary Stainless Steel, Fitzpatrick "A" Series Model D6A Fitzmill, Pan Feed, all Sanitary Stainless Steel Construction, electropolish internal finish, cantilever design, knife/ impact reversible rotor, driven by 5 hp, 3/60/230-460 volt, 1735 RPM, TEFC motor, on Stainless Steel Stand, with casters, ( prior service- pharmaceutical)
PC12587 Fitzpatrick Model DASO-6 Fitzmill, Pan Feed, Sanitary Stainless Steel, Fitz Model DASO-6 Fitzmill, Pan Feed, all Sanitary Stainless Steel Construction, knife/ impact reversible rotor, driven by 5 hp, 3/60/230-460 volt explosion proof motor on Stainless Steel Stand, with casters, prior service- pharmaceutical)
PC12527 Fitzpatrick Fitzmill, Fitzpatrick Model DASO-6 Fitzmill, Pan Feed, Sanitary Stainless Steel Fitz Model DASO-6 Fitzmill, Pan Feed, Sanitary Stainless Steel Construction, knife/ impact reversible rotor,driven by 7.5 hp, 3/60/230-460 volt, 1750 RPM, Explosion Proof Motor, on stand with casters, Serial# 8135. ( prior service- pharmaceutical)
PC12526 Fitzpatrick Fitzmill, Fitzpatrick Model DASO-6 Fitzmill, Gravity Feed, Sanitary Stainless Steel Fitz Model DASO-6 Fitzmill, gravity feed, Sanitary Stainless Steel Construction, knife/ impact reversible rotor, gravity feed hopper with air actuated inlet valve, driven by 7.5 hp, 3/60/230-460 volt explosion proof motor on Stainless Steel Stand, with casters, Serial# 8388. ( prior service- pharmaceutical)
PC12522 Fitzpatrick Fitzmill, DAO- 6 Fitzmill, S/S Model DAO 6, S/N 7038, stainless steel construction, gravity feed, reversible swing/ hammer blades, water cooled bearings, 3- step pulleys, driven by 5 Hp., 3/60/230- 460 volt, 1740 RPM, TEFC motor, complete with belt guards, on steel stand with legs. ( unit can be converted to pan fed)
PC12462 Pulva Corp. Pulverizer, Model C, 40 HP, carbon steel construction, dual horizontal screw feeder with .75 HP 230/460 volt motor, 40 HP 230/460 volt main drive, on base.
PC12457 Mikro Pulverizer Cryogenic Grinding System Model 2-DH, Consisting of: Mikro Model 2-DH Pulverizer, stainless steel construction, rated 7000 RPM, driven by 20 Hp., 3/60/230- 460 volt, 3500 RPM, TEFC motor, Unit has app. 6" dia. X 60" Cryogenic Screw Feeder/Pre-cooler, stainless steel construction with drive.
PC12455 Pulva Pulverizer Model A-GF, (Similar to Mikro #1), Carbon Steel Construction, Gravity Feed, Stirrup Hammers, Belt Driven By 5 HP, 3/60/208-220-440 volt, TEFC motor, mounted on legs with discharge
hopper.
PC12401 Fitzmill, Fitzpatrick Model DASO-6 Fitzmill, Screw Fed, S/S Fitz Model DASO-6 Fitzmill with 3" dia screw feeder, stainless steel construction, fixed impact/impact hammers, reversible rotor, with drives, mounted on stand, driven by 10 hp., 3/60/208/220- 440 volt, TEFC motor, screw by fractional horsepower motor. (Unit Requires Belt Guards)
PC12400 Fitzmill, DASO-6 Fitzmill, S/S Model DASO-6 Fitzmill, stainless steel construction, fixed stepped impact rotor, reversible chamber, top feed, driven by 10 Hp., 3/60/230- 460 volt, 1765 RPM, TEFC motor. 6" feed opening.
PC12399 Fitzmill, Model D-6 Fitzpatrick Comminutor, S/S Fitzmill, Model D-6, stainless steel construction, pan feed, swing type hammer rotor, driven by 5 Hp., 3/60/220-440 Volt, 1750 RPM, explosion proof motor, mounted on base with casters.
PC12363 Mikro Pulivzer Grinding System Model 2-DH, S/S Mikro- Pulverizer Cryogenic Grinding System consisting of: Mikro Model 2-DH Pulverizer, stainless steel construction, rated 7000 RPM, driven by 20 Hp., 3/60/230- 460 volt, 3500 RPM, TEFC motor, Unit has app. 6" dia. X 60" Cryogenic Screw Feeder/ Pre-cooler, stainless steel construction with drive
PC9883 CE Bauer Impact Mill, (Quant. Available: 3) With Integral Air Classifier, Model 730 Hurricane 125 HP Vertical Motor V-Belt Drive, all mounted on common skid frame.
PC1048 Fitzmill Model D-6, Stainless steel, reversible chamber, fixed knife, pan feed, 7.5 HP 208-220/440 volt drive, complete on legs.
PC1284 Fitzmill Model DASO-12, Stainless Steel Construction, Fixed Knives, Reversible Jacketed Chamber, Water Cooled Bearings, 15 HP, explosion proof main drive, 3/60/220-440 Volt, top feed, previously used in pharmaceutical application.
PC1871 Fitzmill Model D-6, Stainless Steel Construction, Reversible Chamber, Fixed Knife Rotor, Pan Feed, 7.5 HP V-Belt Drive, Complete on legs with casters.
PC1872 Fitzmill Model D-6, Stainless Steel Construction, Swinging Knives, Reversible Chamber, Pan Feed, on base with 7.5 HP, 230/460 Volt Drive.
PC1877 Fitzmill Model D-6, Stainless Steel Construction, Reversible Chamber, Swingin Hammers, Pan Feed, 5 HP Drive.
PC3241 Wyssmont Mill, 2 Reel, All Stainless Steel Contacts, 4" Diameter x 13" Face Open Reels, each driven by 1-1/2 HP motors with split pulley V-belt drive arrangement.
PC3490 Mikro Pulverizer, Model 2PF, 20 HP, 230/460 Volt Main Drive on Base, Stainless Steel Construction, Dual Screw Feed Assembly with 1/2 HP 208-230/460 Volt Drive.
PC3503 Jet Mill Pulverizer, Model Palmyra #42, (Quant. Available: 2) 42" Diameter, Single Chamber Micronizer, last used on talc, condition is excellent, removable liners and ports, needs 600 HP, compressor to produce 100 PSIG at 3300 SCFM.
PC10729 Fitzmill Model D6, Hopper Fed, Fixed Blades, 7.5 HP, 1750 RPM, 220/440 Volt, on Steel Legs.
PC10832 Fitzpatrick Fitzmill Model H-30, 18" Diameter x 30" Long Rotor, Carbon Steel Contacts, Swinging Straight Blades, Removable Grinding Chamber Wear Liners, Horizontal Feed Throad, Liquid Feed, Insulated, Driven by Baldor 250 HP, 3550 RPM, 440 Volt, 3 Phase, 60 Cycle Motor. On Common Base.
PC11127 Shutz O'Neil Air Swept Pulverizer Model 12-H, 12" Diameter Chamber, Stainless Steel, with Feed Hopper, single horizontal screw feed assembly driven by 3/4 HP, XP motor drive, 3/60/208-220/440 Volt, complete on base with 10 HP main drive, 3/60/208-220/440 Volt.
PC11221 Bantam Type CF Mikro Pulverizer, Bronze Construction, Strirrup Hammers, Hopper Feed, Mounted on Stand with Drive.
PC11521 Mikro Pulverizer Model 3TH, Reconditioned, Carbon Steel Construction, Stirrup Hammers, Triple Horizontal Screwfeeder with approx. 1/2 HP Drive, 40 HP, 220/440 Volt Main Drive, Unit has new cover and wear plate.
PC11872 Mikro Pulverizer Model 2TH, with 2 Wide Stirrup Hammers, Unit is Carbon Steel Contact Parts, rated to 7000 RPM, Unit has 20 HP, 220/440 Volt, 3500 RPM Motor Drive, Includes triple screw feeder with frac HP Drive, Unit is in Good condition, complete, mounted on stand, cleaned and painted.
PC12015 Fitzpatrick Fitzmill, Model KSO-7, With Stainless Steel Stairstep Blades and Housing, Mill is Driven by 30 HP, 3/60/230-460 Volt, 1770 RPM Motor and V-Belt Drive Giving Rotor Speed of Approx. 1500 RPM, Mill and Drive Mounted on Structural Steel Stand.
PC12079 Pennsylvania Crusher, Reversible Impactor, Model CAL 5-38, Feed Opening 19.25" x 15.5", Equipped with a bolt on feed hopper, 40 HP main drive, V belt driven, 230/460 Volt, with belt guard, rated max input size of 8", 6 swinging hammers, 3 rows of 2, T-head style. spare set of unused hammers included, inside lined with breaker blocks, and frame liners, no discharge grate, adjustable breaker blocks for adj. discharge size, 38" dia. hammer circle diameter, last used to crush tungsten carbide at 1 ton per hour, equipped with hydraulic door opening assembly (pictured: feed hopper, crusher, and bottom discharge hopper, Not pictured but included is hydraulic unit for side doors.
PC12045 Mikropul Pulverizer Model 1W, 5 HP, Stainless Steel Shaft and Housing, Carbon Steel Hammers, Max. RPM 9600, 5 HP Motor, 3495 RPM, 230/460 Volt, on heavy duty base with legs, with Feed Hopper.
BACK TO INVENTORY